KnifeForums.com - Intelligent Discussion for the knife enthusiast

Recent Topics
Recent Pictures
thumb_1490310452-IMG_20170323_125412.jpg
thumb_1489339104-FlynnHunter2SM.jpg
Current Quote
"To educate a person in mind and not in morals is to educate a menace to society"
~ Teddy Roosevelt
Username Post: 1x30 micron belts        (Topic#868499)
enj
Member
*
01-06-10 16:16.35 - Post#2024252    



What is the best source for micron belts...?
I'm new to this forum and thought I'd get some input I need...
Thanks in advance
Ed
 
Stalking Leopard
Master Member KnifeNut!
*
01-06-10 16:43.23 - Post#2024274    


    In response to enj

Supergrit.com is a good source of sand paper at a reasonable price. $50 minimum order though.
 
ragoligist
Master Member KnifeNut!
*
01-09-10 08:55.55 - Post#2026654    


    In response to enj

I got some from Lee Valley Tools..here's the site.....Rich

http://tiny.cc/AxOl3

In case you havn't you also might like to read this.....

http://tiny.cc/KZxuR
rags to riches
Mike#1948


 
knifetinkerer
Master Member KnifeNut!
*
01-09-10 08:58.18 - Post#2026657    


    In response to ragoligist

  • ragoligist Said:
I got some from Lee Valley Tools..here's the site.....Rich

http://tiny.cc/AxOl3



That's where I buy the 3M and Klingspor belts.
 
TwinBlade
Master Member KnifeNut!
*
01-09-10 09:00.58 - Post#2026659    


    In response to knifetinkerer

Keep in mind, 1200 grit is 9 micron, 500 grit is 20 micron. The belts are labeled in grit on the site, but will come with the appropriate micron labeling on the underside of the belt. These are the exact belts I use. I also follow with 2 different compounds on leather belts that you can also pick up from the website.
BRKCA MIKE1196







 
knifetinkerer
Master Member KnifeNut!
*
01-09-10 09:11.03 - Post#2026667    


    In response to TwinBlade

I have all the 3M belts from 80 microns on down, including the 15 that is listed separately.

But I finish manually on leather loaded with grinding compound on a wooden paddle.

Just another (slower) way of doing the same thing with leather belts on the machine.

I have also tried the compound on buffing wheels on a bench grinder, but I need more practice. My touch is too heavy.
 
Icon Legend Permissions & Sharing Options Topic Options
Print Topic


1305 Views
KnifeForums.com - Intelligent Discussion for the knife enthusiast
KnifePromotions

arenaro@verizon.net

FusionBB™ Version 3.2 | ©2003-2017 InteractivePHP, Inc.
Execution time: 0.094 seconds.   Total Queries: 133   Zlib Compression is on.
All times are (GMT-12.0). Current time is 05:42.50
Top